Rifle: AR-15, M-16

Size: .250 dia

Steel with phosphate finish

Price: $13.50

Rifle: AR-15, M-16

Size: .250 dia. or .315 dia.

Steel pivot pin with sling swivel mount with phosphate finish.

Replaces standard front pivot pin. Use quick release sling swivels. Increases match accuracy be eliminating all tension on barrel and upper receiver when shooting with sling.

Price: $13.50

Small hole receiver pivot pin. Designed for quick and easy removal.

Rifle: AR-15, M-16

Size: .250 dia.

Steel with black oxide finish.

This pivot pin has a spring loaded push button. When pushed, the stainless steel keeper pins retract for easy pin removal. The pin is designed to eliminate wear in and around the hole caused by pins with spring loaded balls.

Price: $16.00

Large hole receiver pivot pin. Designed for quick and easy removal.

Rifle: AR-15, M-16

Size: .315 dia.

Steel with black oxide finish.

This pivot pin has a spring loaded push button. When pushed, the stainless steel keeper pins retract for easy pin removal. The pin is designed to eliminate wear in and around the hole caused by pins with spring loaded balls.

Price: $16.00

Rifle: AR-15, M-16

Size: .250 dia.

Steel with black oxide finish.

This push button pivot pin has a spring loaded push button. When pushed, the stainless steel keeper pins retract for easy pin removal. The pin is designed to eliminate wear in and around the hole caused by pins with spring loaded balls. It has a sling stud that is removable on one end. This is the pin used in our SWAT Sling setup.

Price: $20.00

Rifle: AR-15, M-16

Size: .250 dia.

Steel with black oxide finish.

This take-down pin has a spring loaded push button. When pushed, the stainless steel keeper pins retract for easy pin removal. The pin is designed to eliminate wear in and around the hole caused by pins with spring loaded balls.

Price: $16.00

Rifle: AR-15, M-16

Tool Steel

Replaces standard cotter pin found in the bolt carrier to retain the firing pin as in original Stoner rifles.

Price: $7.95

Rifle: M-16

Stainless steel pin with phosphate finish.

Must-have for M-16 owners. No more worn out sear pin holes in the receiver.

Price: $29.50

Rifle: AR-15, M-16

Sizes: Small .154 dia.; Small .1555 dia.; Large .170 dia.

Stainless steel pins. End retainers are black oxide. Connectors have phosphate finish.

An absolute must-have for all M-16 owners. They will also protect your AR-15. Special anti-creep retainers prevent wear on your irreplaceable M-16 or AR-15 receiver. Pin installation tool & 2 allen wrenches included. No modification to gun required.

The .1555 dia. pin is for worn receiver trigger and hammer pin holes. Being non-rotational, further wear is eliminated. They will also fit new receivers and will remove the free-play in match triggers. (.1555 will not fit Jewell Trigger System.)

Price: $32.00 set

Rifle: AR-15, M-16

Sizes: Small .154 dia.; Small .1555 dia.; Large .170 dia.

Stainless steel pins. End retainers are black oxide. Connectors have phosphate finish.

These pins have the same strength as the standard Gen 2 pins, but have the dogbone look of the old Gen 1 pins.

An absolute must-have for all M-16 owners. They will also protect your AR-15. Special anti-creep retainers prevent wear on your irreplaceable M-16 or AR-15 receiver. Pin installation tool & 2 allen wrenches included. No modification to gun required.

The .1555 dia. pin is for worn receiver trigger and hammer pin holes. Being non-rotational, further wear is eliminated. They will also fit new receivers and will remove the free-play in match triggers. (.1555 will not fit Jewell Trigger System.)

Price: $32.00 set

Rifle: AR-15, M-16

Size: .1555 dia.

Stainless steel pins. Connectors have phosphate finish.

Must-have for M-16 owners. This simple non-rotating pin set is for shooters who want to quickly change their trigger set-up wihtout the need of any tools, eliminate receiver wear and tighten up trigger wobble and free-play at the same time. (These .1555 pins will not fit Jewell Trigger System.)

Price: $24.00 set

Rifle: AR-15, M-16

Sizes: Small .154 dia.; Small .1555 dia.; Large .170 dia.

Stainless steel pins

Match grade stainless steel replacement pins for trigger and hammer. CNC machined for correct fit. The .1555 dia. pins are designed to tighten up worn receivers or to be installed in new receivers with match trigger sets to remove all free play. These will fit in new receivers without any machine work.

Price: $4.50 set
(.1555 - will not fit Jewell Trigger System.)

Rifle: AR-15

Probably the finest two stage trigger made, adjustable first stage pull weight and second stage pull weight, sear engagement and overtravel. No modifications to rifle.

Price: $195.00

Rifle: AR-15, M-16

All steel with phosphate finish.

Front sling mount for quick release sling swivels. No modification to gun. Fits all floating & non-floating handguards.

Attaches through top or bottom vent holes in standard hand guard. Allows quick removal of sling when cleaning or when upper and lower receivers are separated.

Price: $14.00

Rifle: AR-15, M-16 and most Carbines

Steel mount with phosphate finish.

Rear sling mount -- quick release. No modification to gun. Will fit some CAR stocks.
Replaces rear sling loop. Attaches with original bottom butt plate screw. Allows quick removal of sling when receivers are separated.

Price: $14.00

This adaptor secures an AR-15 or M-16 with a Colt LMG Upper to a MG42 AA tripod.

Fully CNC machined from 7075 aluminum with black anodized finish.

Price: $65.00

This adaptor secures any weapon with a bottom picatinny rail to a MG42 AA tripod.

Fully CNC machined from 7075 aluminum with black anodized finish.

Price: $65.00

This new product, when properly installed and used on a serviceable Lightning Link, will reinforce the weak area of the link. Installation may require removing .040 material from the bottom of the upper receiver take-down pin lug and a small amount from the back of the hammer. Installation and use of this reinforcement does not imply or express any liability, guarantee or warranty upon the manufacturer or seller to cover the cost or value of the firearm, firearm accessories or lightning link in the event of accident, loss or breakage of any kind.

The Bureau of Alcohol Tobacco Firearms and Explosives has approved the use of this product on legally registered Lightning Links in accordance with the National Firearms Act (NFA).

HOWEVER, USING THIS REINFORCEMENT PIECE TO REPLACE ANY PART OF A REGISTERED BROKEN LIGHTNING LINK WOULD CONSTITUTE THE MANUFACTURE OF A NEW UNREGISTERED MACHINE GUN AND WOULD BE IN VIOLATION OF THE NFA. (Ruling #903050:MRC 3311/2005-474)

Detailed instructions and helpful hints included.

Price: $130.00

Rifle: M-16 -- (Specify full stock or carbine)

Stainless steel

Buffer with spring, EZ installation tool and data manual. Makes rifle controllable in full auto mode. Reduces cyclic rate up to 40%. Eliminates jams and feeding problems and makes gun controllable.

Price: $85.00